Alexor WT8989 User Manual download pdf (Page 5)

Always ensure you obtain the latest version of the User Guide. Updated versions of this User Guide

are available by contacting your distributor.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock and/or injury, observe the following:

• Do not spill any type of liquid on the equipment.

• Do not attempt to service this product yourself. Opening or removing the cover may expose you to

dangerous voltage or other risk. Refer servicing to qualified service personnel. Never open the

device yourself.

• Do not touch the equipment and its connected cables during an electrical storm; there may be a

risk of electric shock.

• Do not use the Alarm System to report a gas leak if the system is near a leak.

REGULAR MAINTENANCE AND TROUBLESHOOTING

Keep your Alarm Controller in optimal condition by following all the instructions that are included

within this manual and/or marked on the product.

CLEANING

• Clean the units by wiping with a damp cloth only.

• Do not use abrasives, thinners, solvents or aerosol cleaners (spray polish) that may enter through

holes in the Alarm Controller and cause damage.

• Do not use any water or any other liquid.

• Do not wipe the front cover with alcohol.

TROUBLESHOOTING

Occasionally, you may have a problem with your Alarm Controller or telephone line. If this happens,

your Alarm Controller will identify the problem and display an error message. Refer to the provided

list when you see an error message on the display. If additional help is required, contact your distrib-

utor for service.

WARNING: This equipment, Alarm System SCW9055/9057 shall be installed and used within an

environment that provides the pollution degree max 2 and over-voltages category II non-hazardous

locations, indoor only. It is designed to be installed, serviced and/or repaired by service persons only

[service person is defined as a person having the appropriate technical training and experience nec-

essary to be aware of hazards to which that person may be exposed in performing a task and of

measures to minimize the risks to that person or other persons]. For EU and Australian markets, the

equipment is permanently connected or direct plug-in connected. For the permanently connected

version, an accessible disconnect device shall be incorporated into the building installation wiring.

For the direct plug-in version, the socket outlet shall be installed near the SCW9055/9057 and shall

be easily accessible. The plug of the direct plug-in transformer serves as the disconnect device.

NOTE: There are no parts replaceable by the end-user within this equipment, except the batteries for the

following: the WT5500 keypad, Indoor Siren (WT4901/WT8901) and the Wireless Key (WT4989/

WT8989).

WARNING: Never obstruct the access to the socket-outlet to which this equipment is connected.

These safety instructions should not prevent you from contacting the distributor and/or the manu-

facturer to obtain any further clarification and/or answers to your concerns.

This publication covers the following models:

• SCW9055-433/868 • SCW9057I-433/868 • WT4989 • WT8911

• SCW9057-433/868 • SCW9055G-433/868 • WT8989 • PT4

• SCW9055D-433/868 • SCW9057G-433/868 • WT4901 • PT8

• SCW9057D-433/868 • WT5500-433/868 • WT8901

• SCW9055I-433/868 • WT5500P-433/868 • WT4911

1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments

Alexor WT8989 User Manual Page 5

Comments to this Manuals

Related products and manuals for Security access control systems Alexor WT8989