Alexor WT4901 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 7
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
DSC Alexor Page 4 of 7
4. Enter 4-digit user code
5. Press # to exit.
To Delete a User Access Code:
1. Press * 5, then enter Master Code.
2. Use the scroll < > buttons to find the specific code.
3. Press *.
4. Press *.
5. Press # to exit.
Note: The keypad will display the user number with a letter “P” if a user code has already
been programmed.
Chime Mode
Your system can alert you to the opening of a door while it is disarmed by using the CHIME
feature. When activated, three beeps will sound at the keypad whenever a door is opened.
Press CHIME button for 2 seconds, or * 4 to enable or disable the chime feature. The
CHIME icon will appear in display. The system will sound 3 beeps when feature is turned
on, or one long tone to indicate the door chime is off.
Time & Date Programming
1. Press * 6, then enter your Master Access Code.
2. Press 1.
3. Enter the time in 24-hour format, using military time (HH:MM).
4. Enter the date (MM:DD:YY).
5. Press # to exit programming.
Keypad Adjustments
Brightness and Contrast
The keypad has 4 different brightness/contrast levels.
1. Press * 6, then enter your Master Access Code.
2. Use the < > buttons to scroll to either Brightness Control or Contrast Control.
3. Press * to select the setting you want to adjust.
4. a) Brightness Control: There are 4 backlighting levels. Use the < > buttons to scroll to
the desired level.
b) Contrast Control: There are 10 different display contrast levels. Use the < >
buttons to scroll to the desired contrast level.
5. The level is automatically saved when you press # to exit.
Buzzer Level
The buzzer provides an audible confirmation of a pressed button or that a command to the
panel has been executed. The keypad has 21 different buzzer levels. A level of 00 disables
the buzzer.
1. Press * 6, then enter your Master Access Code.
2. Use the < > buttons to scroll to Buzzer Control, then press * to select.
3. Use the < > buttons to scroll to the desired level. The level is automatically saved
when you press # to exit.
Page view 3
1 2 3 4 5 6 7

Comments to this Manuals

No comments